30% Off
ON
SAW MACHINE
Online Purchases Only
*OF SLIDING TABLE SAW
-44%
VEVOR Mag Drill Press, 1550W 2″ Boring Diameter, 2922lbf Power Magnetic Drill, 500 PRM, 10-Speed, Electric Drilling Machine for Metal Surface, Industrial and Home Improvement
Original price was: $310.00.$174.00Current price is: $174.00.
- Size Guide
- Reviews (13)
| Size | DHL Box | Internal Dimensions (cm) | Max Weight (kg) | FedEx Equivalent (approx.) |
|---|---|---|---|---|
| XS | Box 2 | 33.7 × 18.2 × 10 | ~1 | Small Box (8″×8″×8″) |
| S | Box 3 | 33.7 × 32.2 × 10 | ~2 | Medium Box (12″×12″×10″) |
| M | Box 4 | 33.7 × 32.2 × 18 | ~5 | Large Box (13″×13″×11″) |
| L | Box 5 | 33.7 × 33.2 × 34.5 | ~10 | FedEx 10kg Box (40.16 × 32.86 × 25.88) |
| XL | Box 6 | 41.7 × 35.9 × 36.9 | ~15 | FedEx Large (16″×16″×16″) |
| XXL | Box 7 / 8 | 48.1 × 40.4 × 38.9 or 54.1 × 44.4 × 40.9 | ~20–25 | FedEx Extra Large (42 × 42 × 47) |
13 reviews for VEVOR Mag Drill Press, 1550W 2″ Boring Diameter, 2922lbf Power Magnetic Drill, 500 PRM, 10-Speed, Electric Drilling Machine for Metal Surface, Industrial and Home Improvement
Add a review
Related Products
5Pcs Countersink Drill Bit Set, Premium Drill Bit with 82-Degree, 5 Flutes, Quick-Change Hex Shank, 1/4 Inch to 3/4 Inch Size, Counter Sink Bits for Wood, Metal, Plastic
Original price was: $9.99.$7.68Current price is: $7.68.
CRAFTSMAN Socket Set with Case VERSASTACK 230 Pcs Mechanics Tool Set, 1/4 in, 3/8 in, and 1/2 Drive, Standard and Deep Socket Set, Short and Long Arm Hex Keys (CMMT45306)
Original price was: $199.00.$148.35Current price is: $148.35.
DEWALT Mechanics Tool Set, SAE and Metric Socket Wrench Set, Drive Sizes 1/2, 1/4, 3/8 Socket Set, 192-Piece Tool Box (DWMT75049)
Original price was: $289.99.$287.49Current price is: $287.49.
ELEAD Jumbo Hex Key Allen Wrench Set | 13-Piece Metric 2-19mm | Long Ball End Durable S2 | Automotive | Mechanic | Furniture | Professional Grade Tools
Original price was: $59.99.$51.74Current price is: $51.74.
WGGE WG-015 Professional 8-inch Wire Stripper/Crimping Tool, Cable Cutter/Crimper, Wiring and Multi-Function Hand Tool, Red With Black
Original price was: $9.99.$10.34Current price is: $10.34.
Scott Ellison –
Mag drill
Works great, very good price, quality is good
George H –
Buy it, it’s worth it
Love this tool… powerful, hold great, highly recommended
Amazon Customer –
Worth the price!
Works better than I figured for the price. Definitely not a precision tool but I drilled 10-1/2â holes in 3/4â plate steel and that was worth the cost to me. Want a precision tool, spend $1,800, want to drill holes in steel and not bust your butt buy this!
Mike O –
Must have for fabricators.
For the money absolutely fantastic!!! This drill has plenty of power, speed, coolant tank, strong magnet. I have used it many times and it really does what it’s supposed to do and it does it well.
Wendac –
VEVOR Mag Drill Press, 1550W
it works good. Arrive in time. hope it lasts.
Andre Patry –
Watch the switch
Check the switch cause no problem with the magnet but the drill doesnât start at each time sometimes I have to play with the switch to strat the drill
Mtfresh –
Strong magnet. Good quality
Awesome mag drill
Robert Neumann –
Cheap Bearings cause TERRIBLE runout
I saw these reviewed on YouTube, and I knew the spindle’s runout may be terrible. But it was worse than that. With the drill chuck installed, it had a full 1/8 inch total out of round at the tip of the chuck. I’m not sure it could even cleanly follow a pilot hole in that condition. The rest of the machines seems very solid and well-made, so I decided to take the risk and try to remove the runout myself.Initially I thought the product must have been dropped, bending the tip of the spindle. So I supported the housing carefully in my press, and applied up to 3 tons of bending force to the spindle’s high spot. It didn’t budge so much as .001. So I disassembled the gear case to get the spindle out. Removing the big drive gear was very difficult, since the gear is keyed to the spindle, and the gear face around the keyway was peened inward. This causes the gear to be bound hard in place, and you can’t get to the perimeter of the gear to put a puller on it. I then went to drill out the key itself, and found it to be hardened. (WHY?)After I drilled the key with a carbide endmill, and pecked out the bulk of it with a small carbide burr, I finally got the gear off and the spindle out.I then mounted the spindle between centers, and found it only had a couple thousandths out of round. So the spindle itself was straight. I ordered new NSK brand upper and lower bearings and re-assembled. Now the tip of the spindle has about 6 thousandths out of round. Visible at high speed, but plenty good enough.So the cheap/nasty Chinese bearings are what makes the spindle have AWFUL runout. And replacing the bearings is possible, but a real pain. BUT: I was trying to disassemble it carefully, not damaging the spindle bearings. If I had it to do over again, I’d just have put puller jaws against the lower bearing and drove the spindle down and outward that way, disregarding damage to the bearings, since they’re getting replaced anyway. That would have been way easier.So if you’re up for that challenge, I still think the product is an OK buy. But you have to think of it as more of a DIY “Mag Drill Kit” than a ready-to-go mag drill.
twan –
Machine works effortlessly drilling 14mm holen through 1cm thick steel like butter. Drilled almost 200 holes over the weekend and can’t find any flaws. Only remark is that with the drill head installed the head becomes heavy and drops making it slightly more difficult to position the drill.Very happy with the purchase. I can recommend this to anyone having second thoughts.
Ian McD –
As I only need a magnetic drill every now and then I wasn’t prepared to pay the huge prices I saw on some of them. There were some really good reviews for this and some not so good. My experience so far has been excellent. It drills clean metals holes with a minimum of effort. Only issue so far: the user manual could do with some instructions for what sort of oil/coolant to use. Excellent value
ian azzaopardi –
It performs flawlessThe only downside it has no speed controlOtherwise fantastic
INSTELVENT S. –
A priori se le ve buen taladro, parece de construcción muy robusta, su funcionamiento es correcto y ahora queda ver la durabilidad.He de decir que no me traÃa la cinta de amarre de seguridad y que al pedirlo me confundà y no lo pedà con el deposito de refrigerante de corte y ahora he querido pedirlo con opción junto con su soporte, y no lo encuentro por ningún lado
Leif –
stabil och bra maskin