30% Off
ON
SAW MACHINE
Online Purchases Only
*OF SLIDING TABLE SAW
-53%
Spear & Jackson CSP3 No. 3 Carpenters Smoothing Plane
Original price was: $49.99.$23.47Current price is: $23.47.
- Size Guide
- Reviews (10)
| Size | DHL Box | Internal Dimensions (cm) | Max Weight (kg) | FedEx Equivalent (approx.) |
|---|---|---|---|---|
| XS | Box 2 | 33.7 × 18.2 × 10 | ~1 | Small Box (8″×8″×8″) |
| S | Box 3 | 33.7 × 32.2 × 10 | ~2 | Medium Box (12″×12″×10″) |
| M | Box 4 | 33.7 × 32.2 × 18 | ~5 | Large Box (13″×13″×11″) |
| L | Box 5 | 33.7 × 33.2 × 34.5 | ~10 | FedEx 10kg Box (40.16 × 32.86 × 25.88) |
| XL | Box 6 | 41.7 × 35.9 × 36.9 | ~15 | FedEx Large (16″×16″×16″) |
| XXL | Box 7 / 8 | 48.1 × 40.4 × 38.9 or 54.1 × 44.4 × 40.9 | ~20–25 | FedEx Extra Large (42 × 42 × 47) |
10 reviews for Spear & Jackson CSP3 No. 3 Carpenters Smoothing Plane
Add a review
Related Products
20lb.Telescoping Magnet Stick,Magnetic Pickup Tool, Gadget for Men Tool Telescoping Magnet Stick,Gifts for Men for Auto Repairer Carpentry etc.Extend up to 30". Small Metal Extends Tools. (3PCS)
Original price was: $16.99.$17.23Current price is: $17.23.
JOREST Contour Gauge with Lock (10 Inch), Gifts Ideas for Men Dad Carpenter Handyman, Profile Tool for Tile Flooring, Carpet laying, Woodworking, Measuring Angle/Shape/Outline/Edge
Original price was: $19.99.$14.94Current price is: $14.94.
MARQUE Combination Bike Lock Cable- 3/8 inch (5FT, 10FT, 15FT, 25FT) Resettable Combination Lock, Anti-Theft Coiled Secutiry Cable for Bicycles, Kayaks, Paddle Boards, Gates and Outdoor Gear (5 FT)
Original price was: $18.99.$20.69Current price is: $20.69.
Power Tool Organizer Wall Mount - 300Lbs Load 3 Layers Storage Rack with 7 Drill Holders for Drills Cordless Tools. Heavy Duty Iron Garage Tool Organizer Storage for Workshop Shed Pegboard Basement
Original price was: $49.99.$45.99Current price is: $45.99.
Toolwiz Magnetic Pick Up Sweeper 17-inch Heavy Duty Magnet Pickup Lawn Sweeper Roofing Tools, 8.8 Lbs Yard Magnet with Telescoping Holder and Wheels to Pick Up Nails Magnetic Sweeper for Construction
Original price was: $19.99.$21.55Current price is: $21.55.
C. Badger –
Excellent tool, considering the price, but set-up needed to perform like a proper smoothing plane.
This is an excellent tool considering the price. (I paid a bit less than $25.) The casting is good, handles are nice, and the blade, chip breaker and cap seem to be pretty well made. Straight out of the box, it was ready to take nice shavings from a piece of red cedar I had laying around. However, the plane needed quite a bit of work to get it to perform like a proper smoothing plane.I disassembled the plane and examined the components. The casting appeared to be well made with no gross defects. The sole of the plane was more-or-less flat, but it did require about 45 minutes to flatten properly. (Working from 80 grit sandpaper to 220.) The sides were perpendicular to the sole. The casting was nicely painted, although there was a bit of paint on the seating for the frog, which I scraped off with a razor blade. As is usual for new planes, the back of the blade needed to be flattened before sharpening. That took about 15 minutes, and sharpening the blade took about 5 more. I put the plane together, adjusted the frog, and made test cuts. Some debris was accumulating between the blade and the chip breaker, indicating a poor fit between the two. I flattened the end of the chip breaker on a stone so that it fit the blade correctly. That took about 10 minutes. Total time required to properly set this up as a smoothing plane was about 1 hr 15 minutes.After setting up the plane, it did indeed perform like a proper smoothing plane. On figured maple, the plane removed very fine shavings and left a glass-like surface. At this point, I am very happy with the plane and consider it to be a bargain despite the work needed for tune up. Thus my 5 star rating. My only real only real complaint is the excessive backlash on the wheel that adjusts the blade depth, but I expect that with an inexpensive plane and can live with it.
GCV –
Overall good quality, requires some fine tuning like all modern cheap hand planes do.
For the price its fantastic I paid $21.76 including tax and shipping! I have been experimenting with these modern hand planes from India under various names Grizzly, Draper and Spear & Jackson.I think there is a larger degree of variability with many of these planes from India, some are better machined and made and require a little less work. This plane by S & J was one such plane? It required the least amount of work out the 3 recent planes I have gotten. They all require flattening the sole and this was no exception just that it was closer to flat to start with. The blade and chipbreaker weren’t bad either and was able to flatten and sharpen them in short order. I did not check the side squareness to sole since I had not planned on using it on a shooting board. The handles were nicely finished a bit more like the handles from Grizzly they were nicely shaped and finished with only like light oil or wax finish which is the way I prefer them, you can actually feel the wood this way. I had to fuss with the plane a little to get the blade and mouth adjusted properly but then it would take nice shavings, I may convert the plane into a scrub plane with a convex sharpening of blade? Overall very worthwhile plane! and I might look and see about ordering other sizes of S&J?
TN –
Good but with a key error
Overall, this might be good to learn to fettle a plane or if you already know how. A true beginner might be very frustrated with this tool. For the price, it is a good value as long as you know what you are getting into. I have to commend S&J for making a number 3 at this price, and compared to any other source of number 3 planes, this is a tremendous deal. After many months, still there it is at a great price, it is a great thing that S&J even offer it. But there were some quality control issues that could trip up a beginner.The casting was dead flat on the sole and perfectly square on both sides. This was excellent. It is a thick casting that feels very solid.The chip breaker is on the cheap side, just a slab of metal, but not too bad and doesn’t need to be fancy to work. The blade and chipbreaker were ground well enough and didn’t require much to make perfectly flat. The chipbreaker did have a rounded edge I didn’t like, so I spent 30 min turning that into a bevel-type edge and ensuring it was flat against the blade. After using, I think the iron quality is basically fine, no obvious issues there.The wheel mechanism is OK, better than some other cheapo models. It is smooth, but it does have some slop. The pressed metal piece that links with the blade itself to advance it was too loose against its mounting pin. So I hammered a nail to remove that cross pin from the frog, and then hammered the eyelet openings the pin runs through to smush them a bit and make the fit tighter. No more slop there.The frog is the big problem. Mine had a casting that wasn’t properly milled, as the factory left a wad of iron next to the screw hole that interfered with the screw height. It raised the screw head against the blade until it made the blade ride above the frog bed! (My photo shows the location…like a blob of iron that was not milled out.) I used a drill and a thin HSS chisel to gouge that blob of iron out so that the blade would seat properly. A normal person would send it back rather than do this.There were also some small chips on the edges of the frog bed casting, but nothing that affects performance.The mouth had some extra iron near a corner that needed very careful filing out for the blade to seat properly on the mouth. The mouth is pretty open for a smoother, so I bought a thicker iron that’s in the mail now.I used a hand file to go over the frog bed and other parts that needed to be flat. Overall except for the big stupid errors, the castings of the frog and body are quite good, if that makes sense…and especially compared to other planes in its class. It’s as if nobody checked this one, quite strange.The handle will need some TLC to get it more comfortable. It’s a nice wood and not sloppy at all but truly needs reshaping with files because some edges bit into the palm too much.After spending an afternoon getting everything as tuned as I could, I got decent 2-2.5 thou shavings and pretty good performance. I still think there’s more fine tuning possible based on the results I’m getting so far. It doesn’t feel as smooth as an old stanley 4, but I hope I can improve that.Overall, I’m happy to have a no 3 size for the price, and I’m treating it like a thrift store find, so I’m happy to put in work as its own project. In truth, nobody needs a number 3, so most people will regard this as a side project. For that, it is rewarding.I do wish the S&J markings were more than a light little etch on the side. But that’s just me. A stamp on the iron would be a nice touch, for instance. A proper chipbreaker would also be fitting.Edit: Months later it is working flawless, the blade has held up well, I get full width shavings and it is really nice to use. The number 3 size is thinner and lighter than most similar smoothers, so I like to have it nearby. Also I see I am listed as Vine Voice. I just joined this week and bought this plane months ago with my own money. Just FYI.
2-Stage –
A great way to begin!
You see, I don’t know much about planes so I didn’t want to spend a fortune. After research on what a really good plane is I opted for this because of its price and features. If weight is any indication, this is heavy. Brass and iron fittings. Wooden (real) handles. The first thing I did was take it apart and examine each piece. The blade might be a little thin but I have nothing to compare. All the knobs and threads work as they should. If you’re going to buy one (any plane) learn HOW they work before purchase. You will have to sharpen and flatten the shoe on any new plane so study how to do that. Once you get the parts, you’ll do fine. They ought to sell this in a kit with a sharpening stone and a selection of sand paper but I already had those. Even if you didn’t use this it’d look great on the shelf!
Henry –
Well made
Well made piece of equipment. Works and handles well
AG –
Item arrived broken
Jarosław Nyzio –
Bardzo dobry stosunek ceny do jakości. Polecam
nigel podd –
I’ve seen a few reviews complaining about the sharpness of this plane and so I thought I’d offer my opinion on it.It’s a nice little plane, fully functional, acceptable quality, and ……………..blunt. So what. Every bladed tool you will buy will need sharpening before use. It took me all of 90 seconds to sharpen, and another couple of minutes setting the plane.Now I have a very nice piece of kit that didn’t cost the world.But a word of advice. If you’re going to buy one, you have to invest in some diamond plates and a leather strop. You not only need these for initial set up, but also to keep the iron sharp going forward.Hope this helps.
Ernesto Gongora –
Por el precio, está muy bien. Con una buela afilada y ajuste normal para una herramienta económica, trabaja súper bien!
E. D. Giralt –
Buen cepillo con poco mas que afilar la cuchilla y asentar la contracuchilla. La suela esta bastante plana. Despues de menos de una hora, logré obtener virutas bastante finas. Muy satisfecho con este cepillo. Con pocos ajustes se pueden lograr resultados como un Lie Nielsen, Veritas o Woodriver.