Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2″ Standard, 4″ Bowl Jaws, and 1″ Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4″ x 8tpi Insert)
615YJl2qtgL. AC SL1000
71jsumk9EKL. AC SL1500
71VgIB82t1L. AC SL1500
511+3TJjhkL. AC SL1000
Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2″ Standard, 4″ Bowl Jaws, and 1″ Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4″ x 8tpi Insert)
Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2" Standard, 4" Bowl Jaws, and 1" Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4" x 8tpi Insert) - Image 2
Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2" Standard, 4" Bowl Jaws, and 1" Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4" x 8tpi Insert) - Image 3
Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2" Standard, 4" Bowl Jaws, and 1" Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4" x 8tpi Insert) - Image 4
Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2" Standard, 4" Bowl Jaws, and 1" Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4" x 8tpi Insert) - Image 5
PEC Tools Machinist Square Precision Engineer Wide Seat Square 90 Right Angle Ground Hardened Steel Angle Ruler 6 x 4 Inch, Suitable for Woodworking and Precision Layout Work PEC Tools Machinist Square Precision Engineer Wide Seat Square 90 Right Angle Ground Hardened Steel Angle Ruler 6 x 4 Inch, Suitable for Woodworking and Precision Layout Work
NOVA 48290 PRO-TEK G3 Insert-Type Wood Lathe Chuck and Jaws Set, 12 pieces NOVA 48290 PRO-TEK G3 Insert-Type Wood Lathe Chuck and Jaws Set, 12 pieces

Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2″ Standard, 4″ Bowl Jaws, and 1″ Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4″ x 8tpi Insert)

0 out of 5
( There are no reviews yet. )

$274.99

Add to wishlist

9 reviews for Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2″ Standard, 4″ Bowl Jaws, and 1″ Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4″ x 8tpi Insert)

  1. Avatar of Leonard Watson

    Leonard Watson –

    Great item
    This chuck kit is a good investment for lathe work.

  2. Avatar of Dave

    Dave –

    Nova 3000. 1.25 head thread
    wow. easy to setup. I’ve only used the small jaws, but hold a 24 inch rod and turning the end..it worked great. tomorrow will be a bowl testthe jaw number is super simple.. unlike earlier versions

  3. Avatar of Kirby S.

    Kirby S. –

    Best lathe chuck
    If you’re looking to invest time and money into woodturning this is the lathe chuck to get.

  4. Avatar of Amazon Customer

    Amazon Customer –

    design flaw with small jaws held on by one weak screw.
    I installed the small jaws that come with the chuck. The small jaws are only held on with one screw for each jaw. I was working on a .75″ dia spindle at 1100 RPM and I had a catch. The catch was not too bad however while spinning the jaw broke off (see picture ) and shot up and hit my mask, then bounced off and cut my hand. You can see from the picture that the screw snapped off at a week point(bottom of the torque driver hole). This is a design flaw because the small jaws are only held on with one weak screw. The two other jaw sets that come with the chuck use two screws per jaw(this is a much better design).

  5. Avatar of Natasha

    Natasha –

    Not ballanced
    Not good.It is out of ballance.The key is hard to line up and use.

  6. Avatar of Linda

    Linda –

    Excellent
    Purchased as a gift. Recipient says it is a great addition to his lathe tools. Works great.

  7. Avatar of Raymond J.

    Raymond J. –

    Super quality …..
    There are no complaints or dislikes ….. high quality all around …..

  8. Avatar of John Eldeen

    John Eldeen –

    Wow very nice chuck
    The Nova chuck is everything that I expected. The tooling is extremely nice it works as well as I anticipated. Yes I do recommend it.

  9. Avatar of George

    George –

    Nice kit. Have used it for 6 months and I am impressed with quality and easy of use. Good starter set with three jaws sizes. Quick responses to my first timer questions on setup.

Add a review

Related Products

3%
2 Position 3 Way G1/8 Pneumatic Momentary Mechanical Valve Pneumatic Mechanical Valve Green Mushroom Push Button Switch MOV-03A for mechanical equipment, textile equipment
Add to wishlist
Add to cart

2 Position 3 Way G1/8 Pneumatic Momentary Mechanical Valve Pneumatic Mechanical Valve Green Mushroom Push Button Switch MOV-03A for mechanical equipment, textile equipment

0 out of 5
Original price was: $13.34.Current price is: $13.74.
-54%
IRWIN Tools Combination Square, Metal-Body, 6-Inch (1794468), Blue
Add to wishlist
Add to cart

IRWIN Tools Combination Square, Metal-Body, 6-Inch (1794468), Blue

0 out of 5
Original price was: $24.99.Current price is: $11.49.
-8%
Power Tool Organizer Wall Mount – 300Lbs Load 3 Layers Storage Rack with 7 Drill Holders for Drills Cordless Tools. Heavy Duty Iron Garage Tool Organizer Storage for Workshop Shed Pegboard Basement
Add to wishlist
Add to cart
,

Power Tool Organizer Wall Mount - 300Lbs Load 3 Layers Storage Rack with 7 Drill Holders for Drills Cordless Tools. Heavy Duty Iron Garage Tool Organizer Storage for Workshop Shed Pegboard Basement

0 out of 5
Original price was: $49.99.Current price is: $45.99.
USHAKE Bike Combination U Lock, Heavy Duty Bike Combination U Lock Paddle Lock for Bicycle Electric Scooter Motorcycles Metal Fence Gate Anti Theft
Add to wishlist
Add to cart

USHAKE Bike Combination U Lock, Heavy Duty Bike Combination U Lock Paddle Lock for Bicycle Electric Scooter Motorcycles Metal Fence Gate Anti Theft

0 out of 5
$27.59
-19%
Wilton Mini F-Clamp, 4″ Opening, 2-1/4″ Throat, 400 Lbs. Clamping Force (Model MMS-4)
Add to wishlist
Add to cart

Wilton Mini F-Clamp, 4" Opening, 2-1/4" Throat, 400 Lbs. Clamping Force (Model MMS-4)

0 out of 5
Original price was: $29.45.Current price is: $23.71.