Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2″ Standard, 4″ Bowl Jaws, and 1″ Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4″ x 8tpi Insert)
615YJl2qtgL. AC SL1000
71jsumk9EKL. AC SL1500
71VgIB82t1L. AC SL1500
511+3TJjhkL. AC SL1000
Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2″ Standard, 4″ Bowl Jaws, and 1″ Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4″ x 8tpi Insert)
Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2" Standard, 4" Bowl Jaws, and 1" Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4" x 8tpi Insert) - Image 2
Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2" Standard, 4" Bowl Jaws, and 1" Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4" x 8tpi Insert) - Image 3
Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2" Standard, 4" Bowl Jaws, and 1" Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4" x 8tpi Insert) - Image 4
Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2" Standard, 4" Bowl Jaws, and 1" Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4" x 8tpi Insert) - Image 5
PEC Tools Machinist Square Precision Engineer Wide Seat Square 90 Right Angle Ground Hardened Steel Angle Ruler 6 x 4 Inch, Suitable for Woodworking and Precision Layout Work PEC Tools Machinist Square Precision Engineer Wide Seat Square 90 Right Angle Ground Hardened Steel Angle Ruler 6 x 4 Inch, Suitable for Woodworking and Precision Layout Work
NOVA 48290 PRO-TEK G3 Insert-Type Wood Lathe Chuck and Jaws Set, 12 pieces NOVA 48290 PRO-TEK G3 Insert-Type Wood Lathe Chuck and Jaws Set, 12 pieces

Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2″ Standard, 4″ Bowl Jaws, and 1″ Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4″ x 8tpi Insert)

0 out of 5
( There are no reviews yet. )

$274.99

Add to wishlist

9 reviews for Nova Pro-Tek 48296 G3 Wood Lathe Chuck Kit with 3 jaw sets (2″ Standard, 4″ Bowl Jaws, and 1″ Pin Jaws) insert version, with adapter insert (with ILNS 1-1/4″ x 8tpi Insert)

  1. Avatar of Leonard Watson

    Leonard Watson –

    Great item
    This chuck kit is a good investment for lathe work.

  2. Avatar of Dave

    Dave –

    Nova 3000. 1.25 head thread
    wow. easy to setup. I’ve only used the small jaws, but hold a 24 inch rod and turning the end..it worked great. tomorrow will be a bowl testthe jaw number is super simple.. unlike earlier versions

  3. Avatar of Kirby S.

    Kirby S. –

    Best lathe chuck
    If you’re looking to invest time and money into woodturning this is the lathe chuck to get.

  4. Avatar of Amazon Customer

    Amazon Customer –

    design flaw with small jaws held on by one weak screw.
    I installed the small jaws that come with the chuck. The small jaws are only held on with one screw for each jaw. I was working on a .75″ dia spindle at 1100 RPM and I had a catch. The catch was not too bad however while spinning the jaw broke off (see picture ) and shot up and hit my mask, then bounced off and cut my hand. You can see from the picture that the screw snapped off at a week point(bottom of the torque driver hole). This is a design flaw because the small jaws are only held on with one weak screw. The two other jaw sets that come with the chuck use two screws per jaw(this is a much better design).

  5. Avatar of Natasha

    Natasha –

    Not ballanced
    Not good.It is out of ballance.The key is hard to line up and use.

  6. Avatar of Linda

    Linda –

    Excellent
    Purchased as a gift. Recipient says it is a great addition to his lathe tools. Works great.

  7. Avatar of Raymond J.

    Raymond J. –

    Super quality …..
    There are no complaints or dislikes ….. high quality all around …..

  8. Avatar of John Eldeen

    John Eldeen –

    Wow very nice chuck
    The Nova chuck is everything that I expected. The tooling is extremely nice it works as well as I anticipated. Yes I do recommend it.

  9. Avatar of George

    George –

    Nice kit. Have used it for 6 months and I am impressed with quality and easy of use. Good starter set with three jaws sizes. Quick responses to my first timer questions on setup.

Add a review

Related Products

-1%
17Pcs File Tool Set with Carry Case,Premium Grade T12 Drop Forged Alloy Steel, Precision Flat/Triangle/Half-round/Round Large File and 12pcs Needle Files/1 brush
Add to wishlist
Add to cart

17Pcs File Tool Set with Carry Case,Premium Grade T12 Drop Forged Alloy Steel, Precision Flat/Triangle/Half-round/Round Large File and 12pcs Needle Files/1 brush

0 out of 5
Original price was: $20.99.Current price is: $20.69.
-2%
4 Pack Stair/Square Gauge Set for Framing Square, Stair Stringer Layout Tool for Circular Saw, Carpentry Squares and Rafter Layout, Aluminum Alloy Stair Gauge Tool(Gold)
Add to wishlist
Add to cart

4 Pack Stair/Square Gauge Set for Framing Square, Stair Stringer Layout Tool for Circular Saw, Carpentry Squares and Rafter Layout, Aluminum Alloy Stair Gauge Tool(Gold)

0 out of 5
Original price was: $9.99.Current price is: $9.76.
-38%
Irwin Tools 1794482 Magnetic Post Level
Add to wishlist
Add to cart

Irwin Tools 1794482 Magnetic Post Level

0 out of 5
Original price was: $9.33.Current price is: $5.74.
-25%
JOREST Contour Gauge with Lock (10 Inch), Gifts Ideas for Men Dad Carpenter Handyman, Profile Tool for Tile Flooring, Carpet laying, Woodworking, Measuring Angle/Shape/Outline/Edge
Add to wishlist
Add to cart

JOREST Contour Gauge with Lock (10 Inch), Gifts Ideas for Men Dad Carpenter Handyman, Profile Tool for Tile Flooring, Carpet laying, Woodworking, Measuring Angle/Shape/Outline/Edge

0 out of 5
Original price was: $19.99.Current price is: $14.94.
-19%
Wilton Mini F-Clamp, 4″ Opening, 2-1/4″ Throat, 400 Lbs. Clamping Force (Model MMS-4)
Add to wishlist
Add to cart

Wilton Mini F-Clamp, 4" Opening, 2-1/4" Throat, 400 Lbs. Clamping Force (Model MMS-4)

0 out of 5
Original price was: $29.45.Current price is: $23.71.