30% Off
ON
SAW MACHINE
Online Purchases Only
*OF SLIDING TABLE SAW
-24%
Micro-Mark All-Metal Ship Model Planking Clamps – Set of 10, 1-1/4” x 1/4” – Stepped Design for Tight Joints, Knurled Aluminum Grip, Fits Bulkheads as Thin as 1/8
Original price was: $24.95.$18.99Current price is: $18.99.
- Size Guide
- Reviews (13)
| Size | DHL Box | Internal Dimensions (cm) | Max Weight (kg) | FedEx Equivalent (approx.) |
|---|---|---|---|---|
| XS | Box 2 | 33.7 × 18.2 × 10 | ~1 | Small Box (8″×8″×8″) |
| S | Box 3 | 33.7 × 32.2 × 10 | ~2 | Medium Box (12″×12″×10″) |
| M | Box 4 | 33.7 × 32.2 × 18 | ~5 | Large Box (13″×13″×11″) |
| L | Box 5 | 33.7 × 33.2 × 34.5 | ~10 | FedEx 10kg Box (40.16 × 32.86 × 25.88) |
| XL | Box 6 | 41.7 × 35.9 × 36.9 | ~15 | FedEx Large (16″×16″×16″) |
| XXL | Box 7 / 8 | 48.1 × 40.4 × 38.9 or 54.1 × 44.4 × 40.9 | ~20–25 | FedEx Extra Large (42 × 42 × 47) |
13 reviews for Micro-Mark All-Metal Ship Model Planking Clamps – Set of 10, 1-1/4” x 1/4” – Stepped Design for Tight Joints, Knurled Aluminum Grip, Fits Bulkheads as Thin as 1/8
Add a review
Related Products
2 Position 3 Way G1/8 Pneumatic Momentary Mechanical Valve Pneumatic Mechanical Valve Green Mushroom Push Button Switch MOV-03A for mechanical equipment, textile equipment
Original price was: $13.34.$11.95Current price is: $11.95.
Irwin Tools IRWIN Marples Forstner Bit Set, Wood Drilling, 8 Piece (1966892)
Original price was: $114.69.$29.98Current price is: $29.98.
MARQUE Combination Bike Lock Cable- 3/8 inch (5FT, 10FT, 15FT, 25FT) Resettable Combination Lock, Anti-Theft Coiled Secutiry Cable for Bicycles, Kayaks, Paddle Boards, Gates and Outdoor Gear (5 FT)
Original price was: $18.99.$17.99Current price is: $17.99.
Power Tool Organizer Wall Mount - 300Lbs Load 3 Layers Storage Rack with 7 Drill Holders for Drills Cordless Tools. Heavy Duty Iron Garage Tool Organizer Storage for Workshop Shed Pegboard Basement
Original price was: $49.99.$39.99Current price is: $39.99.
Teslong Two-Way Articulating Borescope with Light, Industrial Endoscope Inspection Camera with Articulated Probe, Flexible Mechanic Fiber Optic Snake Scope Cam for Wall Automotive Engine Inspect-5FT
Original price was: $129.99.$109.99Current price is: $109.99.
Amazon Customer –
If your doing model ship wood planking â¦..
Strongly recommend .Its helped tighten up my hull planking .Be careful to not over torque the screws popping out . So far that has been an easy fix for 2 with CA glue ( drop of super glue)
William Lore –
Awy
Awesome
J. Trester –
Well worth the price and fuss.
These are the best planking clamps available IMHO. They could be better, however, if the bars were steel instead of pop metal that bends too much. Terrific idea, as long as the ends do not come off, which happens occasionally.
Amazon Customer –
Zzz
They are hard to start but work very well
Ylushtak –
Limited utility; not a bad thing to have in the kit but it won’t plank a whole boat.
I have tried many ways of planking ships. At the end of the day, nails, thumbtacks, or treenails are superior to the fancier approaches like this one. There are some situations where this works but the diameter of the screw is quite large and, should it fail, the frame may break. Furthermore, one end is heavier than the other so the tabs tend to spin under gravity and result in pointing the wrong way, requiring partial unfastening of the screw; the latter cannot be done more than say twice. The location of the screw is a bit weird too, if you plan on using the inside corner to line up the plank, you will fail.I’m going to continue using these where appropriate because it can make planking easier but it’s not a substitute to doing it the old-fashioned way.
Joe D. –
Very good at securing planks when gluing
I’m using them with 2 by 5 mm hull planks. Holds planks securely for gluing or when bending to fit the curve of the hull. Had to get two sets because of the size of the project. The clamp is shaped to hold the plank flat against the hull.
Ben Gaitan –
Not worth the minimal cost
As an update to a previous review the seller wants me to print a lable, package it t and take the defective items in its entirety to the USPS for a return before refund. Like the product, it is not worth my time and I believe they know it. The concept is great but the quality completely voids the purchase. Avoid this product. I give one star only because zero is not an option.
PaPop –
Very Secure Clam Pressure for Hull Planking
Brilliant design and exactly what is needed for planking a hull. Micro screws are self tapping and exert plenty of pressure across the plank. Highly recommended.
Robert A Lane –
Received thank you
David Goodwin –
An invaluable aid to model boat builders. Ideal for first and second planking.
Christian Babin –
très bon produit de qualité. Prix un peu élevé, mais je suis heureux quand même. merci
Miguel F. –
excelente herramienta para una mejor construccion naval
Steve R. –
ok