30% Off
ON
SAW MACHINE
Online Purchases Only
*OF SLIDING TABLE SAW
-19%
KAKA INDUSTRIAL Mini Universal Bender MUB-1 | Hardened Steel Wire and Flat Metal Bender | 5/16 inch Rod, 1×1/8 inch Flat
Original price was: $100.00.$80.91Current price is: $80.91.
- Size Guide
- Reviews (13)
| Size | DHL Box | Internal Dimensions (cm) | Max Weight (kg) | FedEx Equivalent (approx.) |
|---|---|---|---|---|
| XS | Box 2 | 33.7 × 18.2 × 10 | ~1 | Small Box (8″×8″×8″) |
| S | Box 3 | 33.7 × 32.2 × 10 | ~2 | Medium Box (12″×12″×10″) |
| M | Box 4 | 33.7 × 32.2 × 18 | ~5 | Large Box (13″×13″×11″) |
| L | Box 5 | 33.7 × 33.2 × 34.5 | ~10 | FedEx 10kg Box (40.16 × 32.86 × 25.88) |
| XL | Box 6 | 41.7 × 35.9 × 36.9 | ~15 | FedEx Large (16″×16″×16″) |
| XXL | Box 7 / 8 | 48.1 × 40.4 × 38.9 or 54.1 × 44.4 × 40.9 | ~20–25 | FedEx Extra Large (42 × 42 × 47) |
13 reviews for KAKA INDUSTRIAL Mini Universal Bender MUB-1 | Hardened Steel Wire and Flat Metal Bender | 5/16 inch Rod, 1×1/8 inch Flat
Add a review
Related Products
CREWORKS 6.5L Ultrasonic Cleaner with Knob, 1.7 gal 120W Professional Industrial Auto Cleaning Machine for Tools Watch Glasses Retainer Denture Parts, 40kHz Digital Heated Sonic Cavitation Cleaner
Original price was: $139.99.$144.89Current price is: $144.89.
ELEAD Jumbo Hex Key Allen Wrench Set | 13-Piece Metric 2-19mm | Long Ball End Durable S2 | Automotive | Mechanic | Furniture | Professional Grade Tools
Original price was: $59.99.$51.74Current price is: $51.74.
WORKPRO 5-Piece Locking Pliers Set, Pliers Tool Set, Vice Grips with Chrome-vanadium Steel, 5/7/10 inch Curved Jaw Pliers, 6.5/9 inch Long Nose Pliers
Original price was: $25.99.$24.61Current price is: $24.61.
Brian –
Easy to use, works as advertised
All in all, this is a decent bender. I’ve use it to make a number or nested bends with stepped diameters, for example, and I found it was fairly straight-forward to make repeatable bends with very little effort.All the components fit as they were intended to fit, and the moving parts move smoothly. The bending bar was a little loose on the pin, but not bad. I suspect some reviewers who complained about the fit may have missed the set screw that anchors the pivot pin. Also, some people complained that the tool came packaged with oil. To me this is a plus. Carb cleaner and a rag takes care of that. (At least it wasn’t dry cosmoline).In my case, it would have been nice to have an assortment of additional (larger diameter) spacers, but I believe most people will do just fine with the 4 smaller diameters included.
Daniel Carrillo –
Solid tool
Itâs a lot chunkier in person. Should hold up fine for the home shop. Looks pretty nice and is a lot better quality than what I was expecting. This version has a nice finished look to it and the does looked pretty good too. Customer service is good. They accidentally sent the first bender to the wrong adress but quickly sent me another.Not exactly a tight tolerance tool but itâs workable
SVdWH –
Excellent quality for price.
Works as expected out of the box. Highly configurable. I always customize tools according to need. This too provides a rugged base upon which you can add custom fixtures and jigs. For example, a custom center roller die. As with any tool, operating it at it’s upper limit/range will cause it to wear more quickly. If you have a production line job that pushes the limits of the tool, get a bigger tool. For my purposes, this is the perfect size and I expect it to last many years.
Reuben V. –
KAKA SBG-40
This item will not form the size material they claim max round is 5/8 it is actually 5/16. Forming dies are not heat treated correctly type will start to deform in just a few uses. Not worth the money I should have bought a very similar tool that will do the same as what this wan will cheaper.
DNG –
accurate bends, works great
I use this for making u-shaped handles out of 1/2 round. like everyone, i have a shop made hossfeld type bender and it’s good for really thick material but not nearly as accurate as this one. this bender can make very tight radius bends to less than 1/16 inch of where you need it without much setup at all, and if you take your time with marking and measuring a test bend and transfer those marks to your work, bends are right on the money each time.
Amazon Customer –
The quality is pretty sketchy but it’s OK for some uses.
I decided to keep it. I have a lot of tools and I can fix this thing up. The handle was a very sloppy fit in the frame so it wobbled. I filed off some burrs and put in a 0.030″ shim stock for that. Much better now. The pins fit the main frame pivot hole about OK but lean a slight amount not square. The holes for the pins in the handle are very sloppy and the pins wobble around. The pins are about 0.500″ and the holes are about 0.515″ and not consistent at that. I’ll clean up the holes and make my own pins to fit. As it comes it’s passable for round material I suppose. Flat material will have issues with the sloppiness and I’m sure the bends would wander around in direction instead of staying in one flat plane. The instruction sheet is actually decently done, but fairly limited. Overall this thing is disappointing. I was using it partly as a test before buying one of their larger benders, but now I think I’ll look elsewhere.
jerry bennett –
Worth the money
This worked great for bending spoons and other small pieces of metal. Very well constructed.
Art Milano –
Good engineering and concept POORLY MADE NOT WORTH THE MONEY or time to rebuild it.
This wire bending fixture is pure JUNK!!!!! I have not found one part that is square plum or Paralell. The clearance between parts is so sloppy I had to re machine some parts and others make new ones, The engineering is good, it is just so poorly made I was unable to use it right out of the box.
RedBaron –
Having got fed up with my old bender (a cheapie) I splurged on this one thinking it looked a good bit of engineering. Well…..If you do buy it do not even open the box without having to hand:1 quantity of kitchen paper to attempt to de-grease all the parts of the awful lanolin type protection2 a number of Allen keys, not provided (why more than one?? why not settle on one size for the product??)3 some files to work on parts that do not fit (at this price inexcusable – a lazy supplier/manufacturer who cant be bothered to check all fits)4 a lot of patience especially with the instructions that purport to show you how to make a number of complicated things. Would have been much better to show the most efficient way to make one simple bend.After all this my hands, tools and bench covered in lanolin and my mind not in a positive state.So to do todays bending job I used my old bender. A pity I did not check this earlier else I would have returned it for money back.
Joel S. –
It has stops to set the angle. It’s adjustable. It bends things. Does exactly what it’s supposed to do. I use it in my shop regularly.
Gar Lok –
Great price and fast delivery
Luis –
Se ve de buena calidad, aunque algo confuso en sus funciones porque es una herramienta 3 en uno, eso simplifica que está bien diseñado al principio algo confusa la explicación, del video con errores de edición las transiciones en este video no deben hacerlas, además que lo hicieron en dos partes, necesitan hacer otro en un solo video, falto la narración explicativa de cómo usar Tan buena herramientaHola me pueden decir para que es este accesorio? Parece un tope, y si se quita puede girar más el plato? Para prolongar más el cÃrculo de una figura? Gracias de antemano
Jeff –
I have a UB-100 and it has worn over the years. The UB100A is a much improved version that is sturdier and more precise. The bending angle stop is infinitely adjustable and honestly takes some getting used to for proper angle setup however overall it is better that the stop pin idea of the UB100.