30% Off
ON
SAW MACHINE
Online Purchases Only
*OF SLIDING TABLE SAW
-11%
Amana Tool 55227 Carbide Tipped 82 Degree Countersink Set with Adjustable Drill Bit Depth Stop and No-Thrust Ball Bearing 3/8 Dia x 1/8 Drill Dia x 1/4 Inch Quick Release Hex Shank
Original price was: $45.04.$39.99Current price is: $39.99.
- Size Guide
- Reviews (13)
| Size | DHL Box | Internal Dimensions (cm) | Max Weight (kg) | FedEx Equivalent (approx.) |
|---|---|---|---|---|
| XS | Box 2 | 33.7 × 18.2 × 10 | ~1 | Small Box (8″×8″×8″) |
| S | Box 3 | 33.7 × 32.2 × 10 | ~2 | Medium Box (12″×12″×10″) |
| M | Box 4 | 33.7 × 32.2 × 18 | ~5 | Large Box (13″×13″×11″) |
| L | Box 5 | 33.7 × 33.2 × 34.5 | ~10 | FedEx 10kg Box (40.16 × 32.86 × 25.88) |
| XL | Box 6 | 41.7 × 35.9 × 36.9 | ~15 | FedEx Large (16″×16″×16″) |
| XXL | Box 7 / 8 | 48.1 × 40.4 × 38.9 or 54.1 × 44.4 × 40.9 | ~20–25 | FedEx Extra Large (42 × 42 × 47) |
13 reviews for Amana Tool 55227 Carbide Tipped 82 Degree Countersink Set with Adjustable Drill Bit Depth Stop and No-Thrust Ball Bearing 3/8 Dia x 1/8 Drill Dia x 1/4 Inch Quick Release Hex Shank
Add a review
Related Products
Irwin Tools 1794482 Magnetic Post Level
Original price was: $9.33.$4.99Current price is: $4.99.
Irwin Tools IRWIN Marples Forstner Bit Set, Wood Drilling, 8 Piece (1966892)
Original price was: $114.69.$29.98Current price is: $29.98.
SHALL 4-Piece Flat Pry Bar Set -15" 10" 7.5" 5.5"- Heavy Duty & Mini Nail Puller Crowbar, Utility Claw Bar, Wonder Bar, High-Carbon Steel Flat Bar Tool for Home Remolding & Woodworking
Original price was: $20.49.$19.46Current price is: $19.46.
Tool Set - 8V Cordless Drill Kit, 132 Piece Box With Hand Drill, Home Kits for Men & Women, Perfect for Homeowner, Diyer, Handyman
Original price was: $69.99.$45.99Current price is: $45.99.
Wilton Mini F-Clamp, 4" Opening, 2-1/4" Throat, 400 Lbs. Clamping Force (Model MMS-4)
Original price was: $29.45.$20.62Current price is: $20.62.
dug –
Saves time and produces accurate counter sink for screws and holes for plugs.
Great tool to drill and counter sink to the same depth every time. Saves time. The stop doesnât mark the wood surface. The drill is short but itâs easy put a longer one in when I need to go through thicker wood.
One+One –
Great tool.
As good a countersink as could be asked for. Adjustable depth. Non marring. Well worth the price
Jaji –
Worth EVERY PENNY!!
I fall for alot of gadgets – most don’t live up to the hype, or they just flat-out suck! But THIS little thing? Absolutely awesome! It makes every countersink hole perfectly consistent. It’s simple, effective, and honestly just makes me so happy every time I use it. Totally worth it! (Imma buy more before they yank up the price 😉
Vadim Romanov –
Extremely useful and a time saver!
The tool is very well made, high quality and a joy to use. Precise adjustment and uniform quality of results, and a huge time saver for consistent screw sets.Pricey, but delivers what it promises, and you will probably only ever need one.
GadgetGuy –
Awesome countersink
It took me a long time to decide to pay a significant amount for a countersink bit and I am glad that I finally did! This bit is great. Easy to adjust and cuts nice countersunk holes. The bearing system to stop the height adjustment from rotating with the bit when it contacts the wood is smooth. No marring of the wood surface and provides a consistent depth each time. Great product!
Soloviajero –
Compares two versions of this item
Amana makes two versions of this product, a more expensive brass ring, ball bearing model (~$44.00) and a less expensive model (~$33.00) which is lighter and has a âlow frictionâ depth limiter ring made out of plastic. Some reviewers complained the brass ball bearing model left marks on the wood, so I imagine the low friction version is a response to that. I tried both models side-by-side and found the original brass, ball bearing model is superior in every way, in spite of the price difference.The reasons are:Both have a carbide tipped countersink that operates the same way, but the cheaper, low friction model has excessive runout and chatter. My video clip and photos below illustrate this difference. The low friction version has a continuous plastic ring which traps drilling chips beneath the plastic ring as the ring contacts the wood, and the trapped chips under the ring spin around and mar the surface of the wood. The brass ring version has two interrupted sections of the ring that help eject the chips and it didnât mar the wood surface in my tests.In a drill press, both versions showed acceptable runout (the brass version was exemplary) but in a hand-held DeWalt drill, the runout on the cheaper version was excessive.The photo illustrates the difference between the quality of the countersink holes of each version. The brass version produced a noticeably cleaner countersink every time, while the cheaper plastic ring version produced countersinks with obvious chatter marks. You can hear the chatter in the plastic ring, non-ball bearing version. There is a qualitative difference in âfeelâ of each version. The ball bearing version feels like quality, while the non-ball bearing version feels like a light-weight compromise. For the $11.00 difference, Iâd buy the more expensive, heavier, ball-bearing model. I returned the plastic ring versions due to the runout and chatter and kept the ball bearing versions. For uses where top quality appearance of countersinks doesnât matter, either version would be okay. You get what you pay for.
Andrew –
Works great
I just used it this week I loved it.
robert bleidt – streaming media executive –
Probably the best countersink for wood screws with a hand drill
I’ve only used this for a few holes, but thought I would share my initial opinion. I’ve used several countersinks on wood screws and I’m primarily concerned with how smooth the outer edge of the hole is and how repeatable the countersink depth is. I have tried the Snappy, the cheap Ryobi, and a few others.The best I have found until now are sold by Lee Valley and made by an Israeli company. With this product I obtained clean holes with no edge breakout on pine plywood. I looked at the package and it says “made in Israel”. I suppose Amana has a deal with the same company. I did not test counterboring as you would for a plug covering the screw. No scratching of the surface as the collar does not rotate. If you adjust the depth stop, you have a perfect hole that just fits the screw head every time.The only downside to this product is that the collar completely blocks your view of the progress of the countersink. You are drilling blind at this stage unless you can move your head down to see under the workpiece. Just takes some getting used to. The depth is controlled by the collar, so you don’t really need to see what’s happening. You do need to really slow down the drill as the countersink portion is engaged. In general, countersinks like to cut slow if you want a smooth edge. I try for about 200 RPM for a countersink of this size.If you don’t want to spend the money on this, a pretty good hole can be obtained with the Ryobi set AFTER you hone both sides of all the cutting edges. An Ez-lap or similar DMT tool or small sharpening card is good for that. (and they are diamond grit, so they will also sharpen this countersink if you drill enough holes to dull it)This countersink product series includes several drill diameters. This one will clearance drill for the threads on a #8 modern wood or deck screw. Consider the screws you are going to use and whether they have a relieved shank that will extend through the top workpiece. I will probably buy a 1/8″ one for that case.Also, I learned that wood screws, at least the GRK brand, are 90 degree heads. Sheet metal screws and machine screws to imperial (U.S.) standards are 82 degrees. Machine screws for very thin parts (aircraft or electronics sheet metal) are sometimes 100 degrees. Amana offers 82 and 90 degree versions.If you are using a drill press, very good results in wood can be obtained with a machinist’s zero-flute Weldon countersink set. They are HSS and must be sharpened occasionally with a small stone in a moto-tool or die grinder. Those will not counterbore for a plug, only countersink. Machinery suppliers also sell one-flute countersinks that will do pretty good, and solid carbide countersinks. Hand drilling with the common six-flute hardware-store countersinks either leads to burning through the wood since they are not sharp, or more commonly wobbling in the hole and chattering.If you’ve read this far, you are now a countersink expert…Edit: If your collar is turning after contact, try light machine oil under the retaining ring. Made a difference for me.
FBO –
Jâai navigué pas mal entre les produits de ce type. Jâai enfin trouvé le bon !Câest un peu cher mais ça vaut le coupRéglable facilement
Michel Cloutier –
I really liked the double ended hex key that has both hex size for the tool.It works flawlessly. But I suggest using a scrap piece to test your ajustements before drilling in your nice wood.
John Patrick –
Works pretty well, the depth stop does leave a mark that needs cleaning up afterwards.
Jorge G. –
Un poco desilusionado, esperaba más de esta marca. Deja marcas en la madera y puede arruinar el trabajo por completo
Harry K. –
The merchandise arrived on time. It was as per the sellerâs description, as well as per my requirements. The packaging was adequate for transport. The product I had ordered, has proven to be just right for the use intended. My overall experience, with this purchase has been excellent. Superb tool.